Super Anchor MAX Force Energy Absorbers – Snaphook & Mechanical Grab

The Energy Absorber is one of the most critical components for fall protection and is required by OSHA when workers are exposed to a free fall hazard. Designed to limit maximum arrest forces while slowing the descent, our absorbers feature patented domestic manufactured tear webbing and the highest quality connectors. MAX Force personal energy absorbers are manufactured at our factory in Monroe, WA and are ensured for component compatibility with all Super Anchor Safety Personal Protection Equipment. An absolute must for fall protection.

Our Snap Hook Series contains an ANSI Z359.12-09 3,600-pound gate strength snap hook sewn onto the end of the absorber. This connects to the rear D-ring of the user’s full body harness. Maximum arresting force is 900 pounds with a maximum deployment length of 42”.

MAX Force Absorbers are also supplied with Fall Arresters and Integral Adjusters (mechanical rope grabs). Mechanical Fall Arresters and Integral Adjusters have single direction locking functions that require correct orientation when installed onto a lifeline. Fall Arresters are removed from the lifeline by unlocking a hinged gate mechanism. Integral Adjusters are not designed for removal from the lifeline. Factory attachment on the absorber eliminates 1 connector resulting in a lighter component. #4015-C/Z are Panic Grab types that prevent the worker from disabling the locking function during a free fall and comply with CSA Z259.5-12.

Please call 919-226-3466 to have our expert figure your next project and receive a complete quote, including shipping.